Styrofoam Crown Molding With Strip Lights

DIY Foam Crown Molding - 4 in. Wide 8 ft. Long - #CC 453

Additional Information

Product Name With Model #: DIY Foam Crown Molding - 4 in. Wide 8 ft. Long - #CC 453

Posted By: Patricia Boegelein

Color: White

Project Type: -Molding

Select Your Room Type: -Bedroom

Did you hire a professional for this project?: No

Tips: Measured around the room, pencil marks on the wall, to make it even. Needed 2 people to get it straight and hold it in place for a minute. Before installing, paint and stick reflective tape on styrofoam. After installation dries, stick-on strip lights. Hid the hole behind the styrofoam to finish wiring for lights. Work on the molding in the room you are going to install it in because it is fragile to be moving around.

Describe Your Project: Foam Molding was installed using Instant Grab water-based adhesive a few inches below the ceiling line. Painted the molding semi-gloss white. The reflective tape was then placed on the back of the molding. The strip lights were installed after the molding.

Would You Recommend This Project To A Friend And Why?: Yes, easy to do

How Was Your Experience With Our Company And Why?: Fast shipping, no problems.

View Product

2271